Most people call a handyman first. That is a reasonable instinct when a switch stops working or an outlet feels warm to the touch. The problem is that behind those symptoms there is almost always a wiring issue, a circuit fault, or a panel condition that a handyman is not equipped to diagnose or fix correctly. Electrical work requires someone who understands what the circuit is doing and what the code expects, not just someone who can swap the device. That is where we come in.
We handle electrical work throughout Hickory Creek and the surrounding area. Homeowners with older wiring, property managers keeping rentals up to code, and small businesses that need reliable power all call us for the same reason: the work gets done correctly, the price is confirmed before anything is scheduled, and there is a real person on the phone who can scope the job before the visit.
Call (945) 375-7193 to get started.
Rewiring comes up most often in homes where the wiring has aged past what it was designed to carry. Cloth-wrapped conductors, aluminum branch circuit wiring, and knob-and-tube installations were all built for a different era of electrical demand. A partial rewire addresses specific circuits where the problem is localized. A full rewire replaces the conductors throughout the house. Which one fits depends on what the inspection turns up, and we explain the reasoning before any work begins.
Low-voltage work covers the wiring behind doorbells, video doorbell systems, structured data cabling, and similar installations. In a town of Hickory Creek's size, a lot of this work comes from homeowners updating older homes that were never wired for modern communication needs. The rough-in has to happen at the right point in a renovation, before the walls close, and coordinating that timing is part of what we sort out on the call.
Outdoor lighting requires weatherproof fixtures, conduit rated for outdoor exposure, and GFCI protection on all exterior receptacles. Security lighting with motion sensors needs the circuit routed so the sensor and the fixture work together correctly. Landscape lighting runs are wired with proper connections and the right conductor for the distance and load. We handle the wiring from the panel to the fixture, not just the fixture swap.
Replacing an existing light fixture with a ceiling fan is straightforward when the box and wiring are already in place. Installing a fan where no fixture exists is a different job: it means running a new circuit and mounting a fan-rated box that can carry the dynamic load. Vaulted ceilings and older homes with limited attic access add complexity, and we factor that into the scope on the call.
A service upgrade replaces the main panel and, where needed, the meter base and service entrance, and resizes the whole system to match what the property actually draws. Before recommending a panel size, we run a load calculation. That calculation accounts for existing circuits, planned additions, and anything else that will draw from the panel going forward. A panel sized correctly from the start does not need to be revisited when the next appliance goes in.
Surge protection is a natural addition to a panel upgrade. A device installed at the panel intercepts voltage spikes before they travel through the wiring to appliances and electronics throughout the house. In a region where thunderstorms and ice storms are a real part of the year, that protection is worth having at the panel level rather than relying on a power strip at each outlet.
Finding work somebody else did is a routine part of electrical service calls. Most of it falls into one of two categories. Some of it is code-compliant but poorly executed: connections that are technically correct but undersized for the load, or circuits that work but were routed in a way that makes future access difficult. That kind of work can usually be brought up to standard without a full redo.
Some of it has to come out entirely. Wiring that bypasses grounding and bonding requirements, devices installed without the correct AFCI or GFCI protection, or a subpanel wired without proper load calculations are not situations where a partial fix is the right answer. We explain what we find and why it matters before recommending what to do about it. The wiring done properly, start to finish, is what protects the home and satisfies the next inspection.
The first step is always a visual inspection of the panel and the affected circuits. We check for signs of overheating, verify that grounding and bonding are in place, and confirm that the circuit is protected correctly for its location. From that inspection, we can tell you what is safe to leave, what needs attention, and what has to be replaced. There is no guessing and no upselling work that does not need to happen.
A price is arrived at on the call, based on what the job involves. The scope covers what the work is, where it is located in the house, and what condition the existing wiring and panel are in. Those three things drive the number more than anything else.
What can change a quote once the work is underway: opening a wall and finding wiring in worse condition than the symptom suggested, or confirming that the panel does not have the capacity to carry the new circuit without additional work. When something like that comes up, we communicate it before proceeding. You decide whether to expand the scope. Nothing is added to the job without that conversation first.
Getting a quote is simple.
Call (945) 375-7193, describe what you are seeing or what you need, and you will get a straight answer on what the work costs and what it covers.
We confirm the price before scheduling, so there is nothing to figure out after the fact. Prompt response, even for last-minute electrical calls, is part of how we work.
On a renovation or addition, the electrician needs to be on site during rough-in, before insulation and drywall go in. That is the window where circuits are run, boxes are set, and wiring is routed to where it needs to go. If the electrician arrives after the walls are closed, the only option is cutting into finished surfaces, which adds cost and repair work for other trades.
The second visit happens after drywall is complete and before the final inspection. Devices are installed, circuits are tested, and everything is confirmed to meet code before the inspector arrives. Missing that sequence means a failed inspection and a return visit.
The most common problem is a panel that cannot carry the load the renovation adds. A kitchen remodel that adds a dishwasher, a garbage disposal, and under-cabinet lighting on circuits that are already close to capacity is a load calculation problem, not just a wiring problem. We identify that at the planning stage, not after the appliances are in. When you call about a renovation, tell us what the finished space will need and we will scope the electrical side from there. Start with the full list of electrical services if you want the detail before the call.
Scheduling a service call is simple. Call during our hours, describe the job, and we confirm availability and price before anything is booked. We are available every day from 7:00 AM to 9:00 PM, including weekends.
For urgent faults, a burning smell, a sparking outlet, or a breaker that will not hold, we take short-notice calls and work around what the schedule allows. We get to the bottom of the problem fast. When you call us, you get a straight answer about the work.
For tenants and businesses that need to stay operational, we plan the visit around what the property requires. If a circuit needs to be de-energized, we confirm in advance which circuits are affected and how long the work will take, so you can plan around it. Nothing is scheduled without that conversation first.
We carry out electrical work in Hickory Creek and throughout the surrounding communities in Denton County, including Lake Dallas, Highland Village, Corinth, Shady Shores, and Copper Canyon. If your property is in or around this part of Denton County, call and we will confirm coverage at your address. Electrical work here gets handled by people who answer to this area. Give us a call and consider it handled.
Outdoor wiring is run in conduit rated for the environment, with weatherproof fittings at every connection point. The materials used depend on whether the wiring is exposed, buried, or run through a structure, and we confirm the right approach for the specific location before the work starts.
Access to the panel is required for most electrical work. If the panel is in a locked utility room or a shared space, we coordinate access details before the visit so the work is not delayed on arrival. Call us in advance and we will confirm what needs to be arranged.
Some older breaker types are difficult to source, and in some cases the right answer is replacing the panel rather than hunting for a discontinued component. We identify what is in the panel on the visit and explain the options, including whether a compatible replacement is available or whether the panel itself needs to be updated.
We work with what the job requires and can discuss the type of device or fixture you want before the visit. If a specific finish or style needs to match existing hardware, mentioning that on the call helps us confirm whether the work involves a standard device swap or something that needs additional coordination.
Before the walls close. The rough-in stage is when circuits are run, boxes are set, and the wiring is routed correctly for the finished space. Calling after drywall is up means cutting into finished surfaces to reach the wiring, which adds work for both us and other trades. Call us when the renovation is being planned and we will scope the electrical side at the right point in the sequence.
Yes, and scheduling it that way is the right approach. If a new appliance requires a dedicated circuit or a panel upgrade, we scope and schedule that work before the delivery date so the circuit is ready when the appliance arrives.
Call us at (945) 375-7193 with the delivery timeline and we will work backward from there.
Older homes in the area were built to different load expectations than what a modern household draws. Wiring that was sized for a few circuits and a modest appliance load can struggle under a full modern kitchen, home office equipment, and EV charging. An inspection tells you what the existing wiring can carry and where the gaps are, so you know what needs attention before a problem develops.
Call Cedar Hill Electrical Company at (945) 375-7193.
We are available every day from 7:00 AM to 9:00 PM. Simple scheduling. Pricing agreed up front. Power back fast. There are no forms to fill out and no waiting for a callback from an inbox. The phone is the fastest way to get an answer and get the work on the calendar.
Electrical work also reaches these towns: Lake Dallas, Argyle, Roanoke, Northlake.
Take a look at our service area.
Below is a plain look at the electrical work we handle in Hickory Creek and the surrounding area. Each row covers what a service includes, who it fits best, and one practical note worth knowing before you call. If a job does not fit neatly into one category, call and describe what you are seeing and we will point you in the right direction.
| Electrical Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Wiring & Circuit Installation | New circuit runs from the panel, Rewiring of aging or damaged circuits, Rough-in wiring for additions, Final inspection prep | Additions, remodels, and properties where the existing wiring cannot support current loads | Wiring work for additions and remodels is typically inspected at rough-in and again at final. We confirm the permit requirements for your address before starting. |
| Electrical Panel & Service Upgrades | Load calculation before sizing, Main panel replacement, Service entrance update, Subpanel installation | Homes adding EV chargers, major appliances, or running a 100-amp panel under heavy load | Panel work is permitted and inspected in most jurisdictions. We confirm what applies at your address before the work starts. |
| Lighting Installation | Recessed and LED fixture installation, Outdoor and security lighting, Motion sensor wiring, Landscape lighting runs | Interior upgrades, exterior security, and landscape lighting projects | Outdoor fixtures must be rated for the exposure and all exterior receptacles require GFCI protection under current code. |
Call us at (945) 375-7193 to describe the job, get a price, and get it on the schedule. We are available every day from 7 AM to 9 PM.
(945) 375-7193