Roanoke is a small city with a mix of newer construction and homes that have been around long enough to need a second look at the wiring behind the walls. Whether you own a home here, manage a rental, or run a commercial space, the electrical work is the same in one important way: the scope and the price are settled before anything starts. We handle the full range of residential and commercial electrical work in Roanoke, from a single outlet that stopped working to a panel replacement that brings the whole house up to current capacity.
Call us, describe the job, and get a price before anything is scheduled. We are available every day from 7 AM to 9 PM. We cover Roanoke and the surrounding Denton County area, and the process is the same regardless of the job size.
Large kitchen appliances and laundry equipment run on 240-volt dedicated circuits, not the standard 120-volt circuits that power most of a home. When a range, wall oven, or dryer is being installed for the first time, or when an older circuit is undersized for a newer appliance, the circuit has to be run from the panel with the right wire gauge and a breaker sized to match the load. We confirm panel capacity before the work starts.
Outdoor outlets require weatherproof covers and GFCI protection on every circuit. The enclosure keeps moisture out of the connection, and the GFCI shuts the circuit down instantly if it detects a ground fault. For patios, garages, and exterior walls, we run the circuit from the panel, mount the enclosure in a location that makes sense for how the space is used, and confirm the installation is rated for the exposure.
Knob-and-tube wiring was not designed for grounded circuits or for the loads a modern home puts on its wiring. Where it is still present, it is not automatically dangerous, but it does limit what the circuits can carry and it cannot be extended or modified safely. Replacement means running new wire through the existing structure, which is more involved than a panel swap but is the right answer when the wiring itself is the problem.
Lighting work ranges from a single fixture swap to a full recessed lighting layout across a remodeled room. Before any fixture goes in, the circuit is checked for capacity and the box is confirmed to be the right type for the load. Ceiling fan installations follow the same logic: if a fan-rated box is not already in place, we install one before the fan goes up.
Ground-fault and arc-fault protection are required in specific locations, and older homes often have neither. GFCI protection belongs in kitchens, bathrooms, garages, and all outdoor circuits. AFCI protection is required on most bedroom and living area circuits in newer construction and is a practical upgrade in older homes where the wiring has aged. We install both at the device level and at the breaker level, depending on what the panel and the circuit call for.
Battery-powered alarms are better than nothing, but hardwired alarms with battery backup stay on when the power goes out and can be interconnected so that one alarm triggers all of them. We run the wiring, connect the alarms to the circuit, and confirm the interconnect is working before the job is done.
A house that has been renovated on the surface can still have original wiring inside the walls. That is not unusual in Roanoke, where some properties have been through multiple owners and multiple rounds of work. The wiring that was acceptable when the house was built may not match what the home is being asked to carry today.
Knob-and-tube wiring is the most common situation we find in older properties. It is a two-wire system with no ground, and it was not built for grounded outlets, GFCI protection, or the circuit loads that come with a modern kitchen or home office. Aluminum branch circuit wiring is another one. It was used in a specific era as a substitute for copper, and while it is not automatically a problem, it develops connection issues over time at outlets, switches, and fixtures. The fix depends on what the inspection turns up: pigtailing at each device with approved connectors handles it in many cases, and full replacement is the answer when the wiring has degraded past that point.
Not every piece of older wiring has to come out. Some of it is in fine condition and just needs to be left alone. What matters is knowing what you have, and that starts with a call and a visit.
Pulling wire through a finished home means working in the spaces between floors and inside walls. Attic runs, crawl space work, and fishing wire through existing framing all take longer than the same job in an open structure, and the time that takes is part of what goes into a quote. We plan the route before the work starts.
Ceiling fan and fixture installation in a room with a vaulted or two-story ceiling is a different job than the same work at standard height. The mounting, the box type, and the approach all change. We confirm what the ceiling situation looks like on the call so the visit is set up correctly from the start. Electrical work here gets handled by people who answer to this community.
Multi-unit properties in Roanoke have a different setup than a single-family home. The panel for an individual unit is usually inside the unit, but the service entrance and the meter are often shared or located in a common area. Work inside the unit follows the same process as any residential job. Work that touches the shared service or the common-area wiring involves the property manager or the HOA, and we can help you figure out where that line is before the visit is scheduled.
If you are a renter, confirm with your landlord or property manager before booking electrical work that involves the panel or any shared system. For work inside the unit on outlets, switches, and fixtures, the process is straightforward. We work around tenant schedules when the property is occupied and the work needs to happen while someone is home. A quick read of our services page covers the rest.
A price is built from what the job actually involves. The fault has to be found before the repair can be scoped, and what has to be opened up to reach it is part of what moves the number. A loose connection at an outlet is a different job than a wiring fault that traces back to the panel. A circuit addition on a panel with open capacity is a different job than the same addition on a panel that needs to be upgraded first.
The things that change a quote are the things that change the scope. Load calculations matter when a new circuit is being added, because the panel has to be confirmed to carry the new load before the circuit is run. Subpanel installation becomes part of the conversation when a detached structure or a large addition needs its own feed. Grounding and bonding work comes up when an older home has ungrounded circuits throughout. None of those are surprises if the job is scoped correctly on the call.
When you call, you describe the job and we give you a price before anything is scheduled. That price covers what the work involves based on what you have told us. If something different turns up once the wall or panel is open, that gets communicated before it is added to the scope. You decide whether to proceed. Simple scheduling. Pricing agreed up front. Power back fast.
Urgent faults and scheduled work are both handled, so call whenever the need comes up. When a breaker will not reset, an outlet is sparking, or a burning smell is coming from the panel, that is not a situation to wait on. Call and describe what you are seeing. We will talk through the symptoms and get a visit arranged.
For businesses that need to stay open and tenants who cannot be without power for a full day, we plan the work around what the property requires. That means confirming what circuits will be de-energized and for how long before the visit is booked, so the schedule can be built around it. Prompt response, even for last-minute electrical calls, is part of how we work. We get to the bottom of the problem fast.
Yes. We handle electrical work throughout Roanoke and the surrounding area in Denton County, including Westlake, Trophy Club, Northlake, Keller, and Corral City. If your property is in or around this part of Denton County, call and we will confirm coverage at your address.
From a single GFCI outlet to a whole-home rewire, the first step is the same: a call that covers what you need and what it will cost. We're one phone call from getting your power right.
Yes. We work on offices, retail spaces, and light commercial buildings in Roanoke, including panel capacity work, dedicated circuits for equipment, and lighting installation. The process is the same as residential: you call, describe the job, and get a price before anything is scheduled. We work around business hours when the space needs to stay open.
We work with the property schedule to identify windows when the kitchen can be taken offline without affecting service. That coordination happens on the call before the work is booked, and the scope is planned around the available access windows rather than around a fixed schedule that does not fit the operation.
Newer construction typically has a panel sized for modern loads, grounded circuits throughout, and AFCI and GFCI protection already in place. Older properties may have ungrounded circuits, a panel that was never upgraded, or wiring that was installed before current standards applied. The visit starts with a look at what is actually there, and the scope is built from that rather than from assumptions about the age of the house.
We confirm the sequence with you on the call and identify when the electrical work needs to happen relative to framing, drywall, or finish work. Rough-in wiring happens before walls are closed, and trim-out work, installing devices and fixtures, happens after. We work out the timing so the electrical does not hold up the other trades.
An extension cord used as a permanent power source is a sign that the outlet placement does not match the actual need. The right fix is adding an outlet where the load is, either by extending an existing circuit or running a new one. We scope that work on the call and confirm the price before scheduling.
A breaker that trips at predictable times usually points to a load pattern rather than a wiring fault. If a circuit reaches its limit when a particular appliance cycles on, such as an air conditioner or a large kitchen appliance, the circuit may be shared with too many loads. We check the circuit under the conditions that trigger the trip to identify the cause.
If the fault is intermittent or does not present during the visit, we document what was checked and explain what conditions tend to trigger the problem. From there, we discuss whether additional diagnostic steps are needed and what those would involve before scheduling a follow-up.
Access to the attic is required when wiring needs to be run through that space. If stored belongings block the path, clearing enough space to work safely is needed before the visit. We confirm access requirements on the call so you know what to prepare before the electrician arrives.
Yes. We serve the communities around Roanoke, including Trophy Club, Northlake, Westlake, Keller, and Corral City, as well as the broader Denton County area.
Call (945) 375-7193 and we will confirm coverage at your specific address before anything is scheduled.
If you need electrical work in Roanoke or one of the nearby towns, Westlake, Trophy Club, Northlake, Keller, and Corral City are all covered.
Call Cedar Hill Electrical Company at (945) 375-7193.
We are available every day from 7 AM to 9 PM. Describe the job, get a price on the call, and go from there. Give us a call and consider it handled.
Electrical service reaches these neighboring areas too: Northlake, Argyle, Haslet, Saginaw, Hickory Creek.
The rest are on our service area.
Below is a plain look at the electrical work we handle in Roanoke and the surrounding area. Each row covers what a service includes, who it fits best, and one practical note worth knowing before you call. If a job does not fit neatly into one category, call and describe what you are seeing and we will point you in the right direction.
| Electrical Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Load calculation before sizing, Main panel replacement, Service entrance update, Subpanel installation | Homes adding EV chargers, major appliances, or running a 100-amp panel under heavy load | Panel work is permitted and inspected in most jurisdictions. We confirm what applies at your address before the work starts. |
| Older-Home Rewiring | Knob-and-tube assessment and replacement, Aluminum wiring pigtailing or replacement, Whole-home or partial rewire, Load capacity evaluation | Roanoke homes with aging wiring that cannot support modern electrical loads | Aluminum branch circuit wiring develops connection problems over time. The right fix depends on what the inspection finds, and we explain the options before any work begins. |
| Lighting Installation | Recessed and LED fixture installation, Outdoor and security lighting, Motion sensor wiring, Landscape lighting runs | Interior upgrades, exterior security, and landscape lighting projects | Outdoor fixtures must be rated for the exposure and all exterior receptacles require GFCI protection under current code. |
Call us at (945) 375-7193 to describe the job, get a price, and get it on the schedule. We are available every day from 7 AM to 9 PM.
(945) 375-7193