When a property changes hands, gets a new tenant, or goes through a renovation, the electrical system is one of the first things that needs a clear record. We handle the inspection work, the circuit additions, the panel assessments, and the repairs that keep homes and commercial spaces in Lake Dallas running safely. Call to describe the job and get a price before anything is scheduled. We are available every day from 7 AM to 9 PM.
Lake Dallas is a small town, and most of the electrical calls we get here come from single-family homes, a good portion of them older properties where the wiring has not been touched since the house was built. That means knob-and-tube replacement requests, panels that were sized for a lighter load, and circuits that were added by a previous owner without documentation. We handle all of it, from a single outlet to a full service upgrade, and the scope gets confirmed on the call before we put anything on the calendar.
When a property in Lake Dallas is being sold, refinanced, or prepared for a new tenant, a written electrical inspection report gives everyone involved a clear picture of what the system is doing and where it falls short. The inspection covers the panel condition, breaker labeling accuracy, grounding and bonding, GFCI and AFCI protection at required locations, and the visible wiring in accessible areas. What gets recorded is a factual account of what the inspector found, not a sales pitch for more work.
We produce reports that hold up when a lender, a buyer's agent, or a code officer asks follow-up questions. For sellers, an inspection before listing identifies problems early enough to address them on a reasonable timeline. For buyers, it answers the question that a general home inspection often leaves open: whether the electrical system is carrying the load it is being asked to carry, and whether the next owner will need to spend money on it soon. Either way, the report is the starting point, and we walk through what it covers on the call.
Electrical pricing is not a flat rate because the same symptom can have different causes, and different causes involve different amounts of work. A breaker that keeps tripping might be an overloaded circuit that a dedicated line would fix, or it might be a wiring fault that takes time to trace. The price reflects what the job actually involves, and that is determined by what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change without additional work.
For panel upgrades and service-entrance work, load calculations are part of the process. The panel size recommended at the end of that calculation is based on what the property draws now and what it is likely to draw after any additions. A panel that is already at capacity when a homeowner calls about an EV charger circuit is a different job from one with room to spare.
You get the rate on the phone. The price is confirmed before we schedule the visit, and you are told what it covers. If the scope changes once the work is underway because something unexpected turns up behind the wall or inside the panel, that gets communicated before it is added to the job.
Call (945) 375-7193, describe what you are dealing with, and ask anything you want to know about the cost and the scope.
Scheduling a service call is simple. You call, describe the job, and we confirm what is available and what it will cost. For planned work like panel upgrades, lighting installations, or EV charger circuits, we book the visit at a time that works for the property. For problems that will not keep, such as a burning smell from an outlet, a sparking panel, or a circuit that went dead and will not come back, call and we will work out the fastest available time.
For rental properties and occupied commercial spaces, we work around the people who are there. That means coordinating access with a tenant, scheduling around business hours when a circuit needs to be de-energized, and communicating clearly about which areas will be without power and for how long. Prompt response, even for last-minute electrical calls, is part of how we work.
On a kitchen remodel, a bathroom addition, or a garage conversion, the electrical rough-in has to happen before the drywall goes up. That is not a preference. It is the only order in which the work can be done without tearing open a finished wall later. The rough-in covers running the new circuits, positioning the boxes, and confirming the panel has the capacity to carry the new load before the framing is covered.
When a general contractor does not build the electrical visit into the schedule at the right point, the result is either a delay while everyone waits for the electrician, or drywall that comes down after it went up. Neither is cheap. We coordinate with the construction schedule directly and confirm the rough-in timing on the call so the rest of the project can stay on track.
A home addition that adds a kitchen, a laundry room, or a dedicated workshop circuit is adding load to the panel. If the panel is already close to its limit, the addition triggers a service upgrade, and that work needs to happen before the new circuits go in. Getting the load calculation done at the start of the project, rather than after the framing is up, is what keeps the job from stalling mid-build. Each service is described in more depth on our page listing every electrical service.
Low-voltage work covers the wiring behind video doorbells, structured data cabling, and the conduit runs that keep a home or office organized for the technology it actually uses. In an older Lake Dallas home, that often means running new low-voltage wiring through walls that were not built with it in mind. The work is cleaner when it is planned alongside any other electrical rough-in rather than added after the fact.
A Level 2 EV charger runs on a dedicated 240-volt circuit with its own breaker. Before the circuit is run, the panel is checked for available capacity and the service entrance is confirmed to support the added load. If the panel is at its limit, a panel upgrade is scoped and priced as part of the same project. The result is a circuit sized correctly for the charger and the vehicle it will serve.
The electrical side of a backup generator installation is the transfer switch and the wiring that connects it to the panel. The transfer switch isolates the home from the utility line when the generator is running, which is a safety requirement, not an option. Severe thunderstorms and the occasional ice storm across this region make a properly wired generator connection worth having before the next outage, not after. We handle the switch, the wiring, and the panel connection. The generator unit itself is outside our scope, but everything on the electrical side is handled here.
Smart switches and dimmers are straightforward to install where the existing wiring includes a neutral wire at the switch box. Older homes often do not have one, and that changes the scope. We check the wiring before recommending a specific device, so the switch that gets installed is one that will actually work on the circuit it is going into.
An electrical safety inspection is useful in more situations than most people expect. Pre-purchase inspections identify wiring conditions a general home inspector may not catch. Inspections on rental properties confirm that GFCI and AFCI protection is in place at required locations. Periodic inspections on older homes document whether the wiring matches the load it is carrying. The wiring done properly, start to finish, is what protects the home and makes the next inspection straightforward.
When we open a wall or a panel and find wiring that was done by a previous owner or a handyman, the first question is whether it was done safely, not whether it was done by a professional. Connections that are solid, properly protected, and carrying the right load for the circuit can stay. Connections made with the wrong gauge wire, improper connectors, or no ground are corrected or replaced.
Electrical work here gets handled by people who answer to this community. When we find something that needs to come out, we explain what it is, why it is a problem, and what the correction involves before any work is done. There is no drama in it. The goal is a system that works correctly and holds up to inspection, and we describe what that takes plainly. The decision is yours.
Panel upgrades, service-entrance work, new circuit installations, and whole-home rewiring generally require a permit in most jurisdictions. Replacing a device on an existing circuit, such as an outlet or a switch, typically does not. The line between the two depends on the scope of the work and the rules in effect at the property's address, which can differ between a municipality and the unincorporated county around it.
We confirm what applies at your address before the work is scheduled. Filing the permit is part of the job, not an extra step the homeowner has to manage separately. The permit triggers an inspection by the authority having jurisdiction, and passing that inspection is the confirmation that the work was done to the standard required here.
On a renovation or a new addition, the permit inspection has to happen before the walls close. That means the rough-in is inspected while the wiring is still visible, and the job does not move to the next phase until the inspection is cleared. Planning the electrical scope early enough to allow for that timing is what keeps a renovation from sitting idle while an inspection is pending.
We handle electrical work throughout Lake Dallas and the communities around it in Denton County, including Hickory Creek, Shady Shores, Lakewood Village, Corinth, and Highland Village. If your property is in or near this part of Denton County and you want to confirm we cover your address, call and we will let you know.
Coverage here is the same as anywhere else we work: you call, you get a price, and the job gets scheduled. There is no difference in how the work is handled based on which town the property is in.
For most residential jobs, the outage is limited to the affected circuits or a short window during panel work. If a longer outage is expected, we discuss the scope on the call so you can plan around it. We do not install temporary construction supplies as a standalone service.
If underground wiring cannot follow the intended path due to an obstruction, we identify an alternative route or a different wiring method, such as a different conduit path or an overhead run where permitted. We confirm the revised approach and any effect on the price before the work continues.
A general home inspection covers the electrical system at a surface level, checking for visible hazards and obvious deficiencies. An electrical inspection goes further: it includes a detailed look at the panel condition, breaker labeling, grounding and bonding, arc-fault and ground-fault protection at required locations, and the condition of accessible wiring. The result is a written report that gives you a specific account of what the system is doing and what it would take to bring it up to current standards, which is the information you need before committing to the purchase.
Homes in Lake Dallas that have not had electrical updates in some time often have panels sized for a lighter load than what the house now draws, circuits without proper grounding, and GFCI protection missing at required locations. Knob-and-tube wiring turns up in the oldest properties, and aluminum branch circuit wiring is common in homes built in the 1960s and 1970s. We assess what is present and explain what it means for the property before any work is recommended.
Yes. An intermittent fault is worth reporting as soon as you notice it, not after it becomes constant. Faults that come and go are often early signs of a failing connection or a component that is on its way out, and catching them earlier generally means a simpler repair than waiting until the problem becomes persistent or causes damage.
Yes, and that sequencing matters. The electrical rough-in needs to happen before cabinets and countertops are installed, because access to the walls is needed to run circuits for outlets, appliances, and under-cabinet lighting. We confirm the construction timeline on the call and schedule the electrical work to fit the sequence.
The most common reason is finding something unexpected once the wall, ceiling, or panel is open: wiring in worse condition than the symptom suggested, or a panel that cannot support the new circuit without additional work. We communicate anything like that before proceeding so you decide whether to expand the scope. Nothing is added to the job without your agreement.
Moving an appliance to a different wall often means running a new circuit to the new location, particularly for hardwired appliances or those on dedicated circuits. We assess the panel capacity and the routing options on the call and confirm the scope and price before the work is scheduled.
Whatever brought you to this page, whether it is a fault that needs tracing, a panel that needs updating, or a renovation that needs the rough-in done right, we handle it.
Call Cedar Hill Electrical Company at (945) 375-7193.
We are available every day from 7 AM to 9 PM. Simple scheduling. Pricing agreed up front. Power back fast.
Close by, we also take electrical work in: Hickory Creek, Argyle, Northlake.
For every town we reach, see our service area.
Below is a plain look at the electrical work we handle in Lake Dallas and the surrounding area. Each row covers what a service includes, who it fits best, and one practical note worth knowing before you call. If a job does not fit neatly into one category, call and describe what you are seeing and we will point you in the right direction.
| Electrical Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | Load calculation before sizing, Main panel replacement, Service entrance update, Subpanel installation | Homes adding EV chargers, major appliances, or running a 100-amp panel under heavy load | Panel work is permitted and inspected in most jurisdictions. We confirm what applies at your address before the work starts. |
| Electrical Repairs & Troubleshooting | Fault tracing at the source, Circuit and connection inspection, GFCI and AFCI issues, Grounding and bonding problems | Any home or business with an unexplained electrical symptom | A warm outlet cover, a burning smell, or a sparking receptacle warrants a call right away rather than a wait-and-see approach. |
| Backup Generator Installation | Transfer switch installation, Generator circuit wiring, Manual or automatic switch options, Panel connection and sizing | Homeowners who need reliable backup power during summer storms or grid stress events | A transfer switch is required by code. It isolates the home from the utility line while the generator runs, which is a safety requirement, not an option. |
Call us at (945) 375-7193 to describe the job, get a price, and get it on the schedule. We are available every day from 7 AM to 9 PM.
(945) 375-7193